ApplicationDesigned for Explosive Atmospheres Zone 1 and Zone 2; Designed for IIA , IIB and IIC Groups Explosive Atmospheres; Designed for Temperature Classifications T1~T4; Designed for Explosive Hazardous Locations Such as Oil Refinery Storage, Chemical, Pharmaceuticals, Military Industries, Etc. |
The Lamp is Equipped with Tubes While Leaving Factory, Can be Used While It is Powered.
Only One Tube Works Under Emergency Condition;
Stainless Steel Material Has been Used for All Types, If Need, Please Note While Placing Orders;
Upward Opening Model is Available as Per Request, This Upward Opening Model is Convenient for Maintenance in the Back from the Ceiling with No Need of Front Opening.
For Example: If Need BHY Explosion Proof Front Access Fluorescent Fitting, 2X40W Tubes, Recessed 1 Mounting Type, Electromagnetic, with Emergency Unit, the Model Shall Be: BHY-2 X 40q1J
Selection Table
Compliance With: GB 3836.1, GB 3836.3, GB3836.9, GB12476.1, GB12476.5
IEC60079-0, IEC60079-7, IEC 60079-18, IEC 61241-0, IEC 61241-1
Explosion Protection: Ex e mb IIC T4 Gb/Ex tD A21 IP65 T80℃
Rated Voltage: Fluorescent Tube AC220V, 50/60Hz; LED AC100~240V, 50/60Hz
Lamp: T10 Single Pin Instant Start Tube(1X20W, 2X20W, 1X40W, 2X40W), Fa6 Lamp Holder, Electronic Ballast;
T8 Bi-Pin Tube(1X18W, 2X18W, 1X36W, 2X36W), G13 Lamp Holder, Electronic Ballast;
T5 Bi-Pin Tube(1X14W, 2X14W, 1X28W, 2X28W), G5 Lamp Holder, Electronic Ballast;
T8 Bi-Pin Ex-Proof LED (1 X 9W, 2 X 9W, 1 X 18W, 2 X 18W) G13 Holder, Electronic Driver Chip.
Ingress Protection: IP65;
Corrosion Resistance: WF1 * WF2;
Cable Entry: G3/4″;
Cable Outer Diameters: Φ9mm~Φ14mm;
Charging Time: ≤24h;
Emergency Starting Time: ≤0.25s
Emergency Lighting Duration: ≥90min.
Enclosure is Made of Bent Sheet with High Voltage Electrostatic Powder Coated Surface;
Stainless Steel Enclosure is Available as Per Request with Polished Surface;
Enclosure and Frame are of Built-In Chain Connection, and Turn Able Reflector Can be Turned, is Easy for Wiring;
Fasteners Adopts Anti-Dropping to Simplify the Maintenance;
Light Fitting is Designed in Double Sealing Structure with Good Water Proof and Dust Proof;
Built-In Encapsulated Ballast with Good Explosion Protection;
Name Brand Fluorescent Tube with Long Service Life and High Light Efficiency;
It Will be Shifted to Emergency Status When Normal Power is Failed;
Special Designed over Charging and over Discharging Protection Circuit Inside Emergency Unit;
Polycarbonate Lens for Ceiling Type and Recessed 1 Type;
The Transparent Cover of Recessed 2 Light Fitting is Made of High Strength Flat Tempered Glass;
Recessed 2 Type with Less Outer.
Cable or Steel Pipe Wiring.