Product
BSD96 SERIES EXPLOSION PROOF SIGHT GLASS LIGHT FITTINGS
- Details
|
|
ApplicationDesigned for Explosive Atmospheres Zone 1 and Zone 2; Designed for Combustible Dust Zone 21 and Zone 22; Designed for IIA, IIB and IIC Groups Explosive Atmospheres; Designed for Temperature Classifications T1~T6; Designed for Explosive Hazardous Locations Such as Oil Refinery, Storage, Chemical, Pharmaceuticals, Military Industries, Etc. Mainly Used for Chemical Reactors; Designed for Spot When Pedestal; High Brightness LED is with Low Consumption, Long Service Life and Free Maintenance; |
Model Code
Ordering References
The Delay Time is 10 Min;
If There are Special Requirements, Please Indicate When Order.
For Example:If Need Vertical Type BSD96 Explosion Proof Sight Glass Light Fitting, Rated Voltage Ac110, Switch on Body on Off with 10 Mi in Delay Off, The Model Shall Be“Bsd96-Ac110/Bl”.
Selection Table
Features
Enclosure is Die Casted of Aluminum Alloy with High Voltage Electrostatic Powder Coated Surface After Shot Blasting;
High Explosion Protection and Good Appearance;
High Strength Toughtened Glass Cover;
Exposed Fasteners are of Stainless Steel with High Corrosion Resistance Property;
High Brightness LED as Lamp, with Features of Environment Protection Low Power Cosumption, Long Service Life and Maintenance Free Etc;
Magnetic Switch is Designed for Specific Location or Chemical Reactors;
Two Operation Switch Types, on Body Switch and Extral Switch, With Delay Off and Touch Off Control Methods;
Be Equipped with Pedestal Support According to Different Operation Places, the Angel of Lighting is Adjustable as Spot Lighting with Good
Flexibility;
Short Circuit Protection Functon Internal Circuit;
Special Designed Seal Structure Ingress Protection Degree Reaches to IP65;
Steel Pipe or Cable Wiring.
Technical Parameters
Compliance with: GB 3836.1, GB 3836.2, GB12476.1, GB12476.5, IEC60079-0, IEC60079-1, IEC 61241-0, IEC 61241-1
Explosion Protection: Ex d IIC T6 Gb/Ex tD A21 IP65 T80℃
Lamp: LED
Rated Power: ≤10W
Delay off Time: 10min
Ingress Protection: IP65
Corrosion Resistance: WF1
Cable Entry: G1/2"
Cable Outer Diameters: Φ6mm~Φ10mm
Outline&Mounting Dimensions
