Product

• Details

Application Designed for Explosive Atmospheres Zone 1 and Zone 2; Designed for Combustible Dust Zone 21 and Zone 22; Designed for IIA, IIB and IIC Groups Explosive Atmospheres; Designed for Temperature Classifications T1~T4/T3; Lamp: HPM, HPS and MH; Designed for Explosive Hazardous Locations Such as Oil Refinery, Storage, Chemical, Pharmaceuticals, Military Industries, Etc. ATEX Number: LCIE 14 ATEX 3040 X IECEx Number: IECEx LCIE 14.0034X

Ordering References

While Equipped with HPS, HPM, MH Light Source, Light Fittings are Delivered with Built-In Ballast, but No Lamps;

The Gas Discharge Lamp Light Source is Self Equipped by the Users, and It is Suggested to Choose YAMING and PHILPS Brand.

The Conventional Products are Not Equipped with a Capacitor Compensator. If Need, Please Note When Place an Order.

For Example: If Need CCd92 Explosion Proof Light Fittings with HPS 100W and Pendant Type, the Model Shall be “CCd92-N100g”.

Selection Table

Technical Parameters

Compliance With: GB 3836.1, GB 3836.2, GB12476.1, GB12476.5, IEC60079-0, IEC60079-1, IEC 61241-0, IEC 61241-1;

Rated Voltage: AC 220V, 50Hz

Ingress Protection: IP66;

Corrosion Resistance: WF2

Cable Entry: G3/4";

Cable Outer Diameters: Φ9mm~Φ14mm;

Features

Enclosure is Die Casted of Aluminum Alloy with High Voltage Electrostatic Powder Coated Surface After Shot Blasting;

Light Fitting Adopts Thread Spigot and Cementing Compound Explosion Proof Structure with Good Explosion Proof Performance;

Cable Entry is Specially Designed of Double Sealing Clamp Structure to Ensure Its Reliability and Ingress Protection;

Glass Cover, Enclosure Rings and Clamping Rings are with Special Cementing Treatment by Expose Resin;

Integrated Design, Lamp and Electrical Cavity are Completely Separated from Electrical Connection Which Adopts Special Conduit;

Good Dissipation Ensures That Heat from Lamp and Electric Work Can be Transmitted and Dispatched Through Enclosure;

Optimized Photometry Design as of High Purity Aluminum Anodic Oxidation Reflector with High Reflectivity to Improve the Light Efficiency;

Glass Cover with Several Square Ribs Adopts Anti-Glare to Reduce Glare and Light Pollution;

Special Sealing Structure Ensures Ingress Protection IP66;

Exposed Fasteners are of Stainless Steel with High Corrosion Resistance;

Steel-Pipe Laying Wire.